Dakota Ultrasonics DFX-8 plus MANUAL2 - Manual (Page 158)

Dakota Ultrasonics
154
11) Press the OK key to save the changes or the ESC key to cancel editing the
file parameters.
12) Press the MEAS key to return to the measurement screen.
11.7 Changing the active File - Open
The user may have transferred grid/seq templates from a PC to the DFX-8, or setup
grids/seq using the DFX-8 at an earlier time. The name of the currently active file is
always displayed at the top of the Grid/Seq Box in measurement mode (refer to
photo below). It’s not only important to recognize what file is currently active, but also
be able to change the active file at any time. The following procedures outline this
process:
Changing the Active File
Grid Log Sequential Log
1) Press the MENU key once to activate the menu items tab. Press the MENU
key multiple times to tab right and the ESC key multiple times to tab left until