Apple AppleVision 1710AV - Manual (Page 43)

Adjusting height and width
When the height and width are set properly, you should be able to see the
entire image on the screen with no distortion at the edges. If this is not the
case, use the AppleVision Setup control panel to make this adjustment.
Note: If you’re using the AppleVision 1710 AV Display in an area that has a
high level of electromagnetic interference from other equipment (for example,
from another display or unshielded speakers), you may not be able to get
perfect screen geometry.
1 Press a Control button on the front of your display (or open the AppleVision Setup
control panel from the Apple [
K
] menu).
The AppleVision Setup control panel opens.
2 Click the Geometry button.
The Geometry window appears.
3 Click Height/Width.
29 Adjusting the Screen Image
Screen rectangle
Click here to use the
default settings shipped
with your display.
Click to adjust screen geometry.