Apple AppleVision 1710AV User Manual
Page 144
User controls
m Power-on button
m Automatic degauss at power-up; manual degauss by turning power switch
off, then on (capable of full degauss after monitor is turned off for 20
minutes or more)
m Control buttons: Contrast, brightness, bass, treble, microphone on, volume,
mute, and three buttons for on-screen controls
m Additional picture and sound controls available using the AppleVision
Setup control panel (Macintosh users) or on-screen controls (IBM
PC-compatible users)
Active video image area
m Adjusted at the factory for the following standard modes:
Mode
Resolution
Vertical refresh rate
Horizontal scan rate
(hertz)
(kilohertz)
VGA
640 x 480
60
31.5
Macintosh
640 x 480
66.67
34.97
VESA
800 x 600
60.31
37.9
VESA
800 x 600
75
46.9
Macintosh
832 x 624
74.55
49.7
Macintosh
1024 x 768
74.93
60.24
VESA
1024 x 768
60
48.4
VESA
1280 x 1024
60
64.3
VESA
1280 x 1024
75.03
79.98
Audio input signals
m Accepts audio signal of up to 4 Vpp (line level–low sensitivity) or as low
as 20 mVpp (microphone level–high sensitivity) without clipping the
signal, depending upon the level and sensitivity setting
Microphone
m Directional, optimized for use in speech recognition and other voice-
related application programs
146
Appendix B