Apple AppleVision 1710AV - Manual (Page 117)

For your greatest comfort, use the following illustration to help you position
your display.
Connecting the display to your IBM PC-compatible computer
Use these instructions to connect the display to your computer.
Note: If you need to use a video card with your computer, install the card
before you connect the display to your computer.
IMPORTANT Before you connect any cords or cables, make sure that your
computer is turned off and unplugged.
WARNING This equipment is intended to be electrically grounded. Your
display may be equipped with a three-wire grounding plug—a plug that
has a third (grounding) pin. This plug will fit only a grounded AC
outlet. This is a safety feature. If you are unable to insert the plug into
the outlet, contact a licensed electrician to replace the outlet with a
properly grounded outlet. Do not defeat the purpose of the grounding
plug!
Thighs horizontal
Shoulders relaxed
Screen positioned to avoid
reflected glare
Forearms and hands
in a straight line
Forearms level
or tilted up slightly
ower back supported
Feet flat on the floor
Top of the screen at or slightly
below eye level (You may need
to adjust the height of your
monitor by placing something
under it or by raising your
work surface.)
Clearance under work surface
45–70 cm (18–28 in.)
120 Chapter 8