Embroidering screen removing the embroidery unit, Embroidering screen, Removing the embroidery unit – Brother PC 6500 User Manual
Page 91
88
Press a key on the screen with your finger to select the pattern
or to start the indicated function or operation.
1
Press the key showing the character font that you would like
to use.
2
Press this key to embroider a frame.
3
Press this key to embroider a one-point pattern.
4
Press this key to select a pattern from the installed
embroidery card.
5
Press this key to position the embroidery arm so that the
embroidery unit can be removed.
1
2
3
4
5
Embroidering screen
1. Make sure that the embroidery frame has been removed,
press the EMBROIDERY key, and then press
. The
carriage will move to the position where it can be removed.
CAUTION
If the above step is not performed, the embroidery unit
cannot be placed in its box and packing materials for
storage.
1
2. Turn off the sewing machine, hold the left side of the
embroidery unit, and while pressing the release button,
gently slide the embroidery unit away from the machine.
1
Release button
CAUTION
Make sure that the power is turned off, otherwise damage
may result.
Removing the embroidery unit