Brother PC 6500 - Manual (Page 17)

14
CONTENTS
SETTING UP
SEWING
UTILITY
STITCHES
MY CUSTOM
STITCH
TM
(CREATE
YOUR
OWN
STITCH
DESIGNS)
EMBROIDERING
MAINTENANCE
ERROR
MESSAGES
SEWING CHART
PATTERNS
(PROGRAMMED
IN MACHINE)
PRESSER FEET / FEED DOGS
1
2
1. Press the needle position button to raise the needle, and
then turn off the sewing machine.
2. Raise the presser foot lever.
1
3. Press the black button located at the back of the presser
foot holder to release the foot.
1 Presser foot holder
1
2
4. Place the other presser foot below the holder so that the
presser foot pin is aligned with the slit in the holder.
5. Lower the presser foot lever so that the presser foot pin
snaps into the notch in the presser foot holder.
1 Notch in presser foot holder
2 Presser foot pin
It may be necessary to change the presser foot depending on the stitch that is selected.
Changing the presser foot