Zipper inserting (center and side applications), Inserting a centered zipper – Brother PC 6500 User Manual
Page 49
46
2
3
1. Attach presser foot J, sew straight stitches up to the zipper
opening, and then sew reverse stitches. Then, select a
basting stitch and continue sewing to the edge of the fabric.
1
End of zipper opening
2
Reverse stitches
3
Basting stitch
4
Wrong side of fabric
2. Press open the seam allowance, and then use the basting
stitch to baste the zipper in place.
1
Zipper
2
Basting
3
Wrong side of fabric
3. Press [Straight (Mid)], and then press
(presser
foot I). The thread tension automatically adjusts for presser
foot I.
Note
If you pressed
then ZIPPER INSERTION, the thread
tension is automatically adjusted.
5
3
4. Attach the presser foot holder to the right pin of presser foot
I, and topstitch around the zipper 25/64" (1.0 cm) from the
edge of the pressed edge.
1
Presser foot holder attached to right pin of presser foot I
2
Right side of fabric
5. Remove the basting.
Inserting a centered zipper
ZIPPER INSERTING (CENTER AND SIDE APPLICATIONS)
1
Straight (Mid) [straight stitch (center needle position)]
I
1