Brother PC 6500 User Manual
Page 42
39
1
5
3
4. Lower the presser foot lever.
5. Press the reverse/reinforcement stitch button to sew reverse
stitches, and then press the start/stop button. The machine
starts sewing at slow speed.
Note
–
To pause sewing in order to turn or adjust the fabric, press
the start/stop button. To restart sewing, press the start/stop
button again.
–
If automatic reverse/reinforcement stitching is turned on
before you start sewing, pressing just the start/stop button
automatically sews reverse/reinforcement stitches before
sewing.
7. When the end of the stitching is reached, press the
reverse/reinforcement stitch button to sew reverse stitches
and stop the machine.
5
3
8. Press the thread cutter button to cut the threads.
Note
–
Cut thick thread (thicker than #30) with the cutter on the side
of the machine as shown.
–
If automatic thread cutting and automatic reverse/
reinforcement stitching are turned on before you start
sewing, pressing the reverse/reinforcement stitch button at
the end of the stitching automatically sews reverse/
reinforcement stitches, trims the threads and stops the
machine.
6. Adjust the sewing speed using either the sewing speed
controller or the foot controller.
5
3