Be sure to place the edge of the fabric at least
3 to 4 stitch lengths behind the presser foot so
that the reverse/reinforcement stitches can be
sewn.

–

Pressing

so that it changes back to

turns off automatic reverse/reinforcement

stitching.

3. Press the start/stop button.

Reverse/reinforcement stitches are sewn,
and then sewing starts.

Note
If the start/stop button had been pressed to
pause sewing, the beginning reverse/
reinforcement stitches are not sewn.

4. When the end of the stitching is reached,

press the reverse/reinforcement stitch button
to sew reverse/reinforcement stitches and
stop sewing.

Reverse/reinforcement stitches are sewn,
and then sewing stops automatically.

Before sewing, turn on automatic reverse/reinforcement stitching to sew reverse stitches (stitches sewn in
the reverse direction when sewing straight stitches) or reinforcement stitches (three stitches sewn on top of
each other when sewing stitches other than straight stitches) automatically at both the beginning and the
end of the stitching to secure it.