Appliqué quilt stitching, Sample patterns for appliqué quilts – Brother PC 6500 User Manual
Page 72
APPLIQUÉ QUILT STITCHING
1. Trace the pattern onto the appliqué fabric, and then cut
around it leaving an extra margin of between 3/256" and
5/256" (0.3 and 0.5 mm).
1
Seam margin (3/256" to 5/256" (0.3 to 0.5 mm))
2. Cut a piece of thick paper to the exact size of the pattern,
center it in the fabric, and then fold over the seam margin
using an iron.
3. Take away the thick paper.
N
1
2
3
4. Turn the fabric over and attach it in place by sewing basting
stitches around the edge.
5. Attach monogramming foot N, press
, and then sew
around the edge, while making sure that the needle drops
outside of the pattern as close to the edge as possible.
Note
If automatic thread cutting and automatic reverse/reinforcement
stitching are turned on before you start sewing, pressing just the
start/stop button automatically sews reinforcement stitches
before sewing. In addition, pressing the reverse/reinforcement
stitch button at the end of the stitching automatically sews
reinforcement stitches, trims the threads and stops the
machine.
1
Dresden plate
2
Stained glass
3
Sunbonnet Sue
N
1
Appliqué
Sample patterns for appliqué quilts
1
69