Maintenance, Cleaning, Cleaning the screen – Brother PC 6500 User Manual
Page 125: Cleaning the machine surface, Cleaning the shuttle
122
CAUTION
Disconnect the power supply cord from the wall socket before cleaning the screen, otherwise
injuries or an electric shock may occur.
If the front panel is dirty, wipe it gently with a soft, dry cloth. Do not use any organic solvents or detergents.
Cleaning the screen
CAUTION
Disconnect the power supply cord from the wall socket before cleaning the machine surface,
otherwise injuries or an electric shock may occur.
If the surface of the machine is dirty, lightly soak a cloth in neutral detergent, squeeze it out firmly, and
then wipe the surface of the machine. After cleaning it once with a wet cloth, wipe it again with a dry cloth.
Cleaning the machine surface
CAUTION
Disconnect the power supply cord from the wall socket before cleaning the shuttle, otherwise
injuries or an electric shock may occur.
Sewing performance will suffer and bobbin thread detection will become unreliable if dust collects in the
shuttle; therefore, it should be kept clean at all times.
Cleaning the shuttle
CLEANING
MAINTENANCE