Memory, Saving character combinations in the memory – Brother PC 6500 User Manual
Page 113
110
Saving character combinations in the memory
Example:
To save the character pattern
“Girl” in memory address 1
1. Select a font, and then type in the text to
create the pattern.
2. Press the MEMORY button.
1
MEMORY button
3. Press the MEMORY 1 key.
1
If a pattern has already been saved in
memory address 1, it is displayed on the
screen. Press the NEXT and PREV keys
to look for a memory address that is either
empty or contains a pattern that can be
deleted.
Note
–
If a pattern is saved in an address where
another pattern has already been saved, the
old pattern is deleted.
–
Do not turn off the power while a pattern is
being saved (while the message “Saving” is
displayed).
–
It takes approximately 10 seconds for a
pattern to be saved. For details on retrieving a
pattern which has been saved, refer to page
101.
Once the pattern has been saved, the display
returns to the previous screen.
MEMORY
You can save up to 5 different character patterns that you have created and use them again later.
1
1