Connecting patterns – Brother PC 6500 User Manual
Page 119
116
Connecting patterns
Example: To embroider connecting patterns
1. Mark the location on the fabric where you
wish to embroider the design.
2. Position the embroidery sheet over the entire
design drawn on the fabric so that the
reference lines of the embroidery sheet align
with the center of the design, and then draw
reference lines for the entire design.
3. Stretch the fabric between the inner and
outer embroidery frames while making sure
that the reference lines on the embroidery
sheet remain aligned with reference lines for
the design drawn on the fabric. Then, attach
the embroidery frame to the embroidery arm
at the top installation position. (Refer to
pages 90 - 92 for more details on attaching
the embroidery frame.)
1
Top installation position
4. Choose a pattern.
5. Before embroidering each of the two patterns
shown in the illustration, press the LAYOUT
key, and position the pattern correctly. To
rotate the pattern, press
(refer to
page 106). To position the frame so that the
pattern will be embroidered correctly, press
so that it appears as
(refer to
page 107), and then use the arrow keys to
align the needle with the center of each
pattern's reference lines (refer to page 105).
6. Remove the embroidery frame, and then re-
attach it to the embroidery arm at the bottom
installation position.