Brother PC 6500 - Manual (Page 24)

21
CONTENTS
SETTING UP
SEWING
UTILITY
STITCHES
MY CUSTOM
STITCH
TM
(CREATE
YOUR
OWN
STITCH
DESIGNS)
EMBROIDERING
MAINTENANCE
ERROR
MESSAGES
SEWING CHART
PATTERNS
(PROGRAMMED
IN MACHINE)
BOBBIN WINDING / LOWER THREADING
Winding the bobbin
3
7, 8
2 4, 5
1
9
6
3
1
2
1
2
3
1. Plug the machine into the power supply and turn on the
main power switch.
2. Place the spool on the spool pin so that the thread unrolls
from the bottom front of the spool. Then, secure the spool
on the spool pin using a spool cap with the size closest to
the spool size.
1 Spool
2 Spool pin
3 Spool cap
Note
If using fine thread such as cross-wound thread, leave some
space between the spool cap (small) and the spool of thread.
1 Cross-wound thread
2 Spool cap (small)
3 Gap
3. While holding the spool thread with your right hand, use
your left hand to pass the thread through the guides as
shown.