13 [fax report, Fax report] -61 – Konica Minolta bizhub 42 User Manual
Page 86
bizhub 42/36
4-61
4.18
[Fax Settings]
4
4.18.13
[Fax Report]
Specify a way to output reports.
%
Press the Utility/Counter key ö [Admin Settings] ö [Fax Settings] ö [Fax Report].
Settings
[Activity Report]
Configure output settings for Activity Report. To output the report, config-
ure the following settings.
[Output Settings]
Specify the time when the report is to be output.
[Every 100 comm.]: Outputs the report for every
100 communication jobs.
[Every Day]: Outputs the report every day at a cer-
tain time.
[100/ Daily]: Outputs the latest 100 communica-
tion jobs every day at a certain time.
[No]: Is not output.
[Output Time Setting]
Allows you to specify this item if [Every Day] or
[100/ Daily] is selected for [Output Settings].
Specify the time when to output the report.
[Output Limit Setting]
If [Output Settings] is set to [Every Day] or [100/
Daily], select your output preference for Activity
Report.
[Journal 100]: Outputs the information for the 100
most recent communication jobs.
[Within 24 Hours]: Outputs the information for a
maximum 100 communication jobs within the
past 24 hours.
[TX Result Report]
Configure the output settings for TX Result Report. Select output condi-
tions.
[TX Result Report Image]
Specify whether or not an image of the first page of the document is out-
putted in the TX Results Report.
[TX Reserve]
Configure the output settings for TX Reserve Report.
Specify whether to output the report.
[PC-Fax TX Error Report]
Configure the output settings for PC-Fax TX Error Report. Specify whether
to output the report.
[Broadcast Report]
Configure the output settings for Broadcast Report. Specify whether to
output the report.
[Broadcast Result Report]
Configure the output settings for Broadcast Result Report. Select a way to
output the report.
•
With [Mode Once] selected, a broadcast result report is output only
when a transmission still fails after a redial attempt. No report is output
when transmission is completed successfully.
[TX Result Report Screen]
Configure display settings for TX Result Report Screen. Specify whether to
display the report.
[I-Fax RX Error Report]
Specify whether or not to output a reception error report when reception of
an Internet fax fails.