Konica Minolta bizhub 42 - Manual (Page 147)

bizhub 42/36 5-59
5.2 [Security] tab 5
5.2.6 [IP Address Filtering]
You can specify the range of IP addresses from which access to the machine is permitted.
Select [Security] ö [IP Address Filtering] ö [IP Address Filtering].
Reference
- If the range of permitted IP addresses in [Access Permission Address] overlaps the range of refused IP
addresses in [Access Refuse Address], the refused addresses in [Access Refuse Address] are given pri-
ority.
- To specify a single IP address, type the same IP address into both the box for the starting IP address
and for the ending IP address, or type "0.0.0.0" into the box for either the starting IP address or the
ending IP address.
Item Description
[Access Permission Ad-
dress] To specify addresses you permit access from, select [Enable].
Range of IP address per-
mitted access Enter the start and end addresses of ranges you permit access from.
Format: *.*.*.* (Asterisk * can be 0 to 255)
[Access Refuse Address] To specify addresses you deny access from, select [Enable].
Range of IP address re-
fused access Specify the start and end addresses of ranges you deny access from.
Format: *.*.*.* (Asterisk * can be 0 to 255)