Konica Minolta bizhub 42 - Manual (Page 206)

bizhub 42/36 5-118
5.7 [Network] tab 5
[E-mail RX (POP)]
Select [Network] ö [E-mail Settings] ö [E-mail RX (POP)].
Item Description
[E-mail RX (POP)] If [Enable] is selected, e-mail messages can be received.
[POP Server Address] Enter the POP server address.
Format: *.*.*.* (Asterisk * can be 0 to 255)
If the DNS server has already been configured, you can enter the host
name instead. For the host name, specify a fully-qualified domain name
(FQDN).
When using IPv6, you can specify the IPv6 address.
[Port Number] Specify number of the port for communicating with the POP server.
[SSL/TLS] Select whether or not to encrypt a communication between this machine
and the POP server using SSL/TLS.
If [Disable] is selected, [Port Number (SSL)] is grayed out.
[Port Number (SSL)] Enter the port number to be used for SSL communication.
[Login Name] Enter the login name of the POP server (up to 63 characters).
[Change Password] Select this check box to change the password.
[Password] Enter the password to log in to the POP server (up to 15 characters).
[Connection Timeout] Specify the timeout period for a communication with a server.
[APOP Authentication] Select [Enable] to encrypt the login name and password when logging on
to the POP server.
The password is encrypted with MD5 when APOP is used to log on to the
POP server. Before selecting [Enable], check whether the POP server sup-
ports APOP. If the POP server does not support APOP, an error will occur,
resulting in communication failure.
[Auto Check of Arrival] Select whether or not automatic reception is performed.
If [Disable] is selected, you cannot configure the [Polling Rate] setting.
[Polling Rate] Enter the interval where reception is checked via automatic connection to
the POP server.