Konica Minolta bizhub 42 - Manual (Page 37)

bizhub 42/36 4-12
4.5 [Ethernet] 4
4.5.2 [Netware]
Specify Netware setting.
If you change this setting and exit the Ethernet menu, the machine is rebooted.
%
Press the Utility/Counter key ö [Admin Settings] ö [Ethernet] ö [Netware].
[IPP] [Enable]
[RAW Port] [Enable]: [Yes]
[Bidirectional]: [OFF]
[SLP] [Enable]
[SMTP] [Enable]
[SNMP] [Enable]
[WSD Print] [Enable]
[IPSec] [Disable]
[IP Address Filter] [Permit Access]: [Disable]
[Deny Access]: [Disable]
[IPv6] [Enable]: [ON]
[Auto Setting]: [Enable]
Factory default
Settings
[Enable] Select whether or not to enable NetWare.
[Disable]
Factory default
[Netware] [Disable]