Konica Minolta bizhub 42 User Manual
Page 36
bizhub 42/36
4-11
4.5
[Ethernet]
4
[ARP/PING]
Select whether or not the ARP/PING command is used when the IP ad-
dress is assigned.
If the IP address is manually specified, [ARP/PING] is automatically set to
[OFF].
[HTTP]
Select whether or not to enable HTTP.
[FTP]
Select whether or not to enable the FTP server.
[Telnet]
Select whether or not to enable Telnet transmissions.
[Bonjour]
To display the machine as a connected device via Bonjour, select [Enable].
[Dynamic DNS]
Select [Enable] when automatically registering the host name with the DNS
server that supports the Dynamic DNS function.
[IPP]
To use IPP print, select [Enable].
[RAW Port]
[Enable]
To use RAW port (Port 9100) print, select [Yes].
[Bidirectional]
Select whether or not to enable RAW port bidirec-
tional communication.
If the RAW port setting is disabled, this item is not
displayed.
[SLP]
Select whether or not to enable SLP.
[SMTP]
Select whether or not to enable E-mail transmission operations for this ma-
chine.
[SNMP]
Select whether or not to enable SNMP.
[WSD Print]
Select whether or not to enable WSD printing.
[IPSec]
Select whether or not to enable IPsec.
[IP Address Filter]
[Permit Access]
Select [Enable] to allow access from certain IP
addresses.
[Deny Access]
Select [Enable] to deny access from certain IP ad-
dresses.
[IPv6]
[Enable]
[ON]: Enable the IPv6 Setting.
[OFF]: Disable the IPv6 Setting. Buttons except
for this one are not displayed.
[Auto Setting]
To obtain the IPv6 address automatically, select
[Enable].
[Link Local]
Displays the link-local address generated from
the MAC address.
[Global Address]
Displays the global address.
[Gateway Address]
Displays the gateway address.
Factory default
[Enable]
[ON]
[IP Address]
[0.0.0.0]
[Subnet Mask]
[0.0.0.0]
[Gateway]
[0.0.0.0]
[DHCP]
[ON]
[BOOTP]
[OFF]
[ARP/PING]
[OFF]
[HTTP]
[Enable]
[FTP]
[Enable]
[Telnet]
[Enable]
[Bonjour]
[Enable]
[Dynamic DNS]
[Disable]
Settings