Konica Minolta bizhub 42 - Manual (Page 209)

bizhub 42/36 5-121
5.7 [Network] tab 5
[LDAP Server Registration]
Select [Network] ö [LDAP Settings] ö [LDAP Server Registration].
Item Description
[Server Address] Specify the LDAP server address.
Format: *.*.*.* (Asterisk * can be 0 to 255)
If the DNS server has already been configured, you can enter the host
name instead. For the host name, specify a fully-qualified domain name
(FQDN).
When using IPv6, you can specify the IPv6 address.
[Port Number] Enter a port number.
[SSL/TLS] Select whether or not SSL/TLS is used.
If [Disable] is selected, [Port Number (SSL)] is grayed out.
[Port Number (SSL)] Enter the port number to be used for SSL communication.
[Search Base] Enter the search starting point in the directory structure under the LDAP
server (up to 255 characters).
This search function also covers subdirectories under the entered starting
point.
[Timeout] Enter the timeout period for LDAP search.
[Max. Search Result] Enter the maximum number of items that can be received as LDAP search
results.
[Authentication Method] Select the authentication method to log in to the LDAP server.
The authentication method must match that used in the LDAP server.
If [anonymous] is selected, [Login Name], [Password], and [Domain Name]
can be omitted.
If [GSS-SPNEGO] is selected, log in to the server in the Kerberos authen-
tication method. The Kerberos authentication method is supported by Ac-
tive Directory.
[Login Name] Enter the login name to log in to the LDAP server (up to 255 characters).