Konica Minolta bizhub 42 User Manual
Page 205
bizhub 42/36
5-117
5.7
[Network] tab
5
Reference
-
When specifying a setting for [SMTP Server Address], also specify a setting for [Device E-mail Address].
[SSL/TLS]
Select whether or not to encrypt a communication
between this machine and the SMTP server using
SSL/TLS.
If [Disable] is selected, [Port Number (SSL)] is
grayed out.
[Port Number (SSL)]
Enter the port number to be used for SSL commu-
nication.
[Connection Timeout]
Select the length of time until the connection with
the SMTP server times out.
[Administrator E-mail Ad-
dress]
Displays the e-mail address of the administrator.
[Device E-mail Address]
Specify the e-mail address of the device.
In order to perform network scanning, be sure to
specify an address for [Device E-mail Address].
[Max Mail Size]
Select whether to limit the size of an E-mail to be
sent.
If [No Limit] is selected, you cannot configure the
[Server Capacity] setting.
[Server Capacity]
Enter the SMTP server capacity. A mail that ex-
ceeds the upper limit of the server capacity will be
discarded.
If an E-mail is divided, this setting is made invalid.
[Binary Division]
Select whether or not to divide an E-mail.
If the E-mail software that received an E-mail does
not have a restoration function, you may not be
able to read the E-mail.
If [Off] is selected, you cannot configure the [Divid-
ed Mail Size] setting.
[Divided Mail Size]
Enter the divided mail size to divide an E-mail.
[POP Before SMTP]
Select [Enable] to perform POP before SMTP au-
thentication.
[POP Before SMTP Time]
Enter the period from a time you log in to the POP
server to a time you access the SMTP server.
If the POP and SMTP servers are in different com-
puters, it will take time to notify the SMTP server
that you have logged in to the POP server. There-
fore, if a too short time is specified, sending of E-
mails may fail.
[SMTP Authentication]
If [Enable] is selected, SMTP authentication is en-
abled.
For SMTP authentication, the authentication
method with the highest strength that is supported
by the SMTP server is automatically selected from
Digest-MD5, CRAM-MD5, PLAIN, and LOGIN.
If [Disable] is selected, you cannot configure the
[Account], [Password], [Domain Name] setting.
[Account]
Enter the user ID for SMTP authentication (up to
255 bytes).
[Change Password]
Select this check box to change the password.
[Password]
Enter the password for SMTP authentication (up
to 128 bytes).
[Domain Name]
Enter the domain name (realm) for SMTP authen-
tication (up to 255 characters).
This setting is required when the authentication
method is set to Digest-MD5.
Item
Description
Control Panel