beautypg.com

7 [ieee802.1x, Ieee802.1x] -60 – Konica Minolta bizhub 42 User Manual

Page 148

background image

bizhub 42/36

5-60

5.2

[Security] tab

5

5.2.7

[IEEE802.1X]

You can configure IEEE802.1X settings.

Select [Security] ö [IEEE802.1X] ö [IEEE802.1X].

Item

Description

[IEEE802.1X]

Select whether or not to enable the IEEE802.1X function.

[EAP Type]

Select an EAP authentication method.
If you select [Server Specification], the EAP-Type provided by the authen-
tication server will be used for authentication.
Configure the supplicant settings as required for this machine according to
the EAP-Type provided by the authentication server.
Do not set this item to [None].

[User ID]

Enter a user ID (up to 128 characters).
This user ID is used for all EAP-Type options.

[Change Password]

Select this check box to change the password.

[Password]

Enter the password (up to 128 characters).
The password is used for all EAP-Type options other than [EAP-TLS].

[TTLS Anonymous Name]

Enter an anonymous name to be used for EAP-TTLS authentication (up to
128 characters).
This item is available if [EAP-Type] is set to [EAP-TTLS] or [Server Specifi-
cation].
If [EAP Type] is set to [Server Specification] while the actual authentication
method is EAP-MD5, type in the same name as that specified for [User ID].

[TTLS Authentication Type]

Select an EAP-TTLS inner authentication protocol.
This item is available if [EAP-Type] is set to [EAP-TTLS] or [Server Specifi-
cation].

[Send Client Certificate]

Select whether to encrypt authentication information using client certifi-
cates of this machine. You can configure this setting when client certifi-
cates are registered in this machine.
If [EAP-Type] is [EAP-TLS], the client certificates are always required.
This setting can be configured even if [EAP-Type] is set to [EAP-TTLS] or
[PEAP].

[Server ID]

Enter a server ID (up to 64 characters).
This setting is required if you verify the CN of the server certificate.

This manual is related to the following products: