Konica Minolta bizhub 42 - Manual (Page 215)

bizhub 42/36 5-127
5.7 [Network] tab 5
5.7.8 [SNMP Settings]
Configure the settings for SNMP function.
Select [Network] ö [SNMP Settings] ö [SNMP Settings].
Item Description Control Panel
[SNMP] If [Enable] is selected, SNMP is enabled. page 4-10
[SNMP v1/v2c(IP)] If [Enable] is selected, SNMPv1/v2c (IP) is ena-
bled.
[SNMP v3(IP)] If [Enable] is selected, SNMPv3 (IP) is enabled.
[SNMP v1(IPX)] If [Enable] is selected, SNMPv1 (IPX) is enabled.
[UDP Port] Enter a UDP port number.
The currently used port number cannot be speci-
fied.
[SNMP v1/v2c Settings] Configure the settings for SNMP v1/v2c.
[Read Community Name] Enter a community name used for reading (up to
15 characters, excluding " ' # \ and space).
[Write] If [Enable] is selected, the Write function is ena-
bled.
[Write Community Name] Enter a community name used for reading and
writing (up to 15 characters, excluding " ' # \ and
space).
[SNMP v3 Settings] Configure the settings for SNMP v3.