Konica Minolta bizhub 42 - Manual (Page 264)

bizhub 42/36 7-15
7.1 Using authentication unit 7
14
Turn the Power Switch of this machine off, connect the authentication unit to this machine, and turn
the Power Switch of this machine on.
NOTICE
To turn the Power Switch off and on, first turn the Power Switch off, and then turn it on after 10 or
more seconds has elapsed. Not doing so may result in an operation failure.
When connecting or disconnecting the USB cable, hold the plug. Otherwise, the machine may be dam-
aged or a failure may occur.
Associating the user with card using authentication device
When a user and card ID have been registered using Data Administrator, the user must be associated with
the card in the Administrator Settings of the machine.
1
Use the Control Panel of this machine to display the Administrator Settings screen.
2
Press [Authentication Setting].
3
Press [Card Authentication].
4
Select a user to be registered, and press [OK].
% Press [All] to display all users. Press [Search] to extract target users with search characters.
5
Press [Edit].
% Press [Delete] to cancel the registration when IC card information is already registered.
6
Place the IC card on Working Table WT-510, and press [OK].
% This associates the user with the IC card and registers the IC card for the user.