Konica Minolta bizhub 42 - Manual (Page 60)

bizhub 42/36 4-35
4.10 [Maintenance Menu] 4
4.10.4 [Finisher Settings]
Adjust the width of the paper alignment plate to align the output sheets of paper.
0 This item is available if the Finisher FS-529 is installed.
%
Press the Utility/Counter key ö [Admin Settings] ö [Maintenance Menu] ö [Finisher Settings].
[Paper Alignment Plate Settings]
Adjust the width of the paper alignment plate to align the output sheets of paper.
1
Press the Utility/Counter key ö [Admin Settings] ö [Maintenance Menu] ö [Finisher Settings] ö
[Alignment Plate Position (Side)] or [Alignment Plate Position (Back)].
2
Select the paper alignment plate position.
3
Press [+] or [-] to adjust the position.
4
Press [OK].