Konica Minolta bizhub 42 - Manual (Page 275)

bizhub 42/36 8-11
8.3 Glossary 8
Scan Size A function to specify the scanning size of an original to transmit it. If the width of
the paper in the recipient's fax machine is smaller than that of the transmitted
document, the document will usually be reduced for printing purposes. If you do
not want to reduce the document size, specify the same document size as that
of the paper in the recipient's fax machine, so that you can send the document
with its original size.
Scanning The reading of an image in scanner operation by moving aligned image sensors
step by step. The direction of moving image sensors is called the main scanning
direction, and the direction of image sensors alignment is called the sub-scan-
ning direction.
Screen font A font used for displaying characters/symbols on a CRT or other monitor.
Screen frequency The density of dots used to create the image.
Sender Fax No. An identification code used for the mutual recognition for fax transmission. Usu-
ally the fax number is registered for the fax ID.
Sender Name The name of a sender. On the receiver's side, the name is printed as a part of the
sender's information at the edge of the transmitted original.
Sending Sending indicates making a call. For fax, sending indicates sending originals or
dialing for pollings.
Shared printer A printer connected to a server on the network and configured to be used by mul-
tiple computers.
Sharpness A function to enhance the edge of characters before sending the document.
Single-page TIFF A TIFF file that contains only a single page.
SLP The acronym for Service Location Protocol, which is a protocol capable of finding
services on the TCP/IP network, and the automatic configuration of clients.
SMB The acronym for Server Message Block, which is a protocol allowing the share of
files and printers mainly over the Windows network.
SMTP The acronym for Simple Mail Transfer Protocol, which is a protocol used to trans-
mit or transfer E-mail.
SNMP The acronym for Simple Network Management Protocol, which is a management
protocol in the TCP/IP network environments.
Spool The acronym for Simultaneous Peripheral Operation On-Line.
Data to be output to a printer is not sent directly to the printer, but is temporarily
stored in another location. The stored data is then sent collectively to the printer.
SSL/TLS The acronym for Secure Socket Layer/Transport Layer Security, which is an en-
coding method used to transmit data between the Web server and a browser in
a secure manner.
Subnet mask A value used to divide a TCP/IP network into small networks (subnetworks).
This is used to identify how many higher-order bits of an IP address are used for
the network address.
Sub-scanning direc-
tion The vertical direction for scanning originals.
Super G3 (SG3) A G3 communication mode complying with ITU-T V.34. Compared with usual G3
communication, it allows the higher rate transmission (up to 33,400bps).
TCP/IP The acronym for Transmission Control Protocol/Internet Protocol, which is a de
facto standard protocol widely used for the Internet.
An IP address is used to identify each network device.
TCP Socket TCP Socket indicates an API used for the TCP/IP network. This socket is used to
open a transmission route for input or output of usual files.
Temporary docu-
ment saving A function to save received documents automatically to memory when the ma-
chine is unable to print the documents for some reason such as running out of
paper. When a proper action is taken such as refilling of paper, the temporarily
saved document is printed out.
Thumbnail A function to display the content of an image or document file as a small image
(image displayed when the file is opened).
Term Description