Leading edge adjustment tray, Leading edge adjustment tray] -31 – Konica Minolta bizhub 42 User Manual
Page 56
bizhub 42/36
4-31
4.10
[Maintenance Menu]
4
5
Check that the distance from the starting print position of the test
pattern to the edge of the paper (a) is 3/16 inches (4.2 mm).
% Press [+] or [-] to adjust the width.
Press the Start key to print a test pattern.
6
Press [OK].
[Leading Edge Adjustment Tray]
Adjust the starting print position at the leading edge of each paper tray (with respect to the paper feed direc-
tion).
0
Only 8-1/2 e 11 v (A4 v) paper can be used to adjust the each tray.
1
Press the Utility/Counter key ö [Admin Settings] ö [Maintenance Menu] ö [Printer Adjustment] ö
[Leading Edge Adjustment Tray].
2
Select a paper tray to be adjusted.
3
Load the paper into the selected paper tray.
4
Press the Start key.
A test pattern is printed.
5
Check that the distance from the starting print position of the test
pattern to the edge of the paper (a) is 3/16 inches (4.2 mm).
% Press [+] or [-] to adjust the width.
Press the Start key to print a test pattern.
6
Press [OK].
a
a: 3/16 inches (4.2 mm)
a
a: 3/16 inches (4.2 mm)