Paper source settings, Paper source settings] -73 – Konica Minolta bizhub 42 User Manual
Page 161
bizhub 42/36
5-73
5.4
[Print] tab
5
[Paper Source Settings]
Select [Print] ö [Default Settings] ö [Paper Source Settings].
[Paper Type]
Select the type of paper loaded in the selected
tray.
Refer to the [User's
Guide Print Opera-
tions].
[Collate]
Select whether or not collating pages sequentially
when printing multiple sets of copies.
[Auto Continue]
Select whether or not printing continues if the size
or type of paper in the selected paper tray is differ-
ent from the size or type of paper for the print job.
[Hold Job Timeout]
Select the length of time until print jobs saved on
the hard disk are deleted.
Item
Description
Control Panel
Item
Description
Control Panel
[Tray1]
[Size Detection
Mode]
Select whether or not to automatically
detect the size of paper loaded in the
Tray 1.
If [Auto] is selected, [Paper Size] is
grayed out.
Refer to the [Us-
er's Guide Print
Operations].
[Paper Size]
Specifies the setting for the size of paper
loaded into Tray 1.
[Width]
Specifies the paper width when [Paper
Size] is set to [Custom Size].
[Length]
Specifies the paper length when [Paper
Size] is set to [Custom Size].
[Paper Type]
Specifies the setting for the type of paper
loaded into Tray 1.
[Tray2]
[Paper Size]
Displays the setting for the size of paper
loaded into Tray 2.
[Paper Type]
Specifies the setting for the type of paper
loaded into Tray 2.