2 error message, Error message -3 – Konica Minolta bizhub 42 User Manual
Page 267
bizhub 42/36
8-3
8.2
Error Message
8
8.2
Error Message
Follow the instructions below if error messages are displayed.
Message
Possible Cause
Remedy
[Configuration of Options
Changed]
[Configuration of options has
been changed. Power OFF and
ON.]
While the power of the machine
was ON, the configuration of
options was changed.
Turn the machine off, then on
again.
[Job Log Error]
[The job log has reached the
maximum allowed. Contact the
administrator.]
The write area of the job log has
reached the maximum allowed.
Delete the job log using the Con-
trol Panel or PageScope Web
Connection.
[Card Authentication Registra-
tion Error]
[Authentication failure. Try again
from the beginning.]
Error occurred while reading IC
card.
Restart registration from the be-
ginning.
[Counter reached its limit.]
[Counter has reached its maxi-
mum allowance. Please delete
the job.]
The upper limit of the counter is
exceeded.
Delete a job.
[Expiration Error]
[The Enhanced Server Authenti-
cation application has expired.
Change the User Authentication
method to one other than En-
hanced Server Authentication.]
In external server authentica-
tion, the account is expired.
Contact your server administra-
tor.
[IEEE802.1x Authentication fail-
ure.]
[Please reboot.]
Due to timeout during
IEEE802.1X port authentication,
user was automatically forced to
log off.
Reboot the machine, perform
IEEE802.1X port authentication,
and log in.
[IEEE802.1x Authenticating]
[Please wait.]
IEEE 802.1X port authentication
is being performed.
If authentication is successful, the
message is cleared.
If authentication times out, turn
the machine off, then on again.
[Incorrect HDD]
[Format HDD.]
The HDD used in another ma-
chine is installed.
Format the HDD from the control
panel.