Ipsec peer settings, Ipsec peer settings] -58 – Konica Minolta bizhub 42 User Manual
Page 146
bizhub 42/36
5-58
5.2
[Security] tab
5
[IPsec Peer Settings]
Select [Security] ö [IPsec] ö [IPsec] ö [Edit] (IPsec Peer Settings).
(Up to 10 peers can be registered.)
Item
Description
[No.]
Displays the number to be registered.
[Encapsulation Mode]
Select an IPsec operation mode.
[Peer's Address]
Enter the IP address of the peer.
When using IPv6, you can specify the IPv6 address.
[Perfect Forward Secrecy]
To increase the IKE security level, select [Use].
If you have selected [Use], the communication time increases.
[Pre-Shared Key]
Enter the Pre-Shared Key text to be shared with the peer (up to 64 charac-
ters).
This text must be the same as that used at the peer.
This manual is related to the following products: