Konica Minolta bizhub 42 - Manual (Page 80)

bizhub 42/36 4-55
4.18 [Fax Settings] 4
4.18.7 [Closed Network RX Password]
Specify whether to use the Closed Network RX function. To use the function, specify a password that is used
for Closed Network RX.
%
Press the Utility/Counter key ö [Admin Settings] ö [Fax Settings] ö [Closed Network RX Password].
Reference
- Closed Network RX is only available when the receiver has password transmission function.
4.18.8 [Forward TX Settings]
You can forward received documents to a preset recipient.
%
Press the Utility/Counter key ö [Admin Settings] ö [Fax Settings] ö [Forward TX Settings].
Settings
[Enable] Specify whether to use the Closed Network RX function.
[Password] Specify a password using the keypad. (up to 4 digits)
Factory default
[Enable] [No]
Settings
[Forward TX Setting] Specify whether to use the Forward TX function.
[Forwarding Address] Allows you to enter a destination (fax number or E-mail address) using up
to 38 digits. It is also possible to select it from the address book.
[Forward & Print] [Forward & Print]: Received document are forwarded and printed on this
machine.
[Forward & Print (If TX Fails)]: Received documents are forwarded and, if
forwarding fails, are printed on the machine.