Konica Minolta bizhub 42 - Manual (Page 78)

bizhub 42/36 4-53
4.18 [Fax Settings] 4
4.18.5 [Fax Function Settings]
Configure the fax function settings.
%
Press the Utility/Counter key ö [Admin Settings] ö [Fax Settings] ö [Fax Function Settings].
[Duplex Print (RX)] [OFF]
Factory default
Settings
[F-Code TX] Specify whether to use F-Code TX.
•
F-Code TX provides two methods: confidential transmission and relay
transmission.
[Dest. Check Display
Func.] Specify whether to display the list of the specified destinations when send-
ing a fax.
[Confirm Addr (TX)] When specifying a fax destination with direct input, a screen appears
prompting you to enter the fax number again for confirmation. Entering the
fax number twice prevents one from entering incorrect destinations.
•
When Confirm Address (TX) is enabled, you cannot specify a destina-
tion using [Off-Hook]. You cannot specify the fax address using [Log]
either.
[Confirm Addr (Register)] When the user specify a fax destination when the user registers a program,
configures the fax forwarding settings, or registers a one-touch destina-
tion, the user must enter the destination twice for confirmation. By entering
twice, you can prevent the destination from being incorrectly entered.
[Restrict Fax TX] Select whether to restrict fax transmissions.
If [ON] is selected, the fax transmission function is unavailable in the fax
screen.
[Restrict Fax RX] Select whether to restrict fax receptions.
If [ON] is selected, the fax reception function is unavailable in the fax
screen.
[Restrict PC-Fax TX] Select whether to restrict PC-Fax transmissions.
If [ON] is selected, the PC-Fax transmission function is unavailable.
[Restrict Internet Fax TX] Select whether to restrict Internet Fax transmissions.
If [ON] is selected, the internet fax transmission function is unavailable in
the fax screen.
[Restrict Internet Fax RX] Select whether to restrict Internet Fax receptions.
If [ON] is selected, the internet fax reception function is unavailable in the
fax screen.
Factory default
[F-Code TX] [ON]
[Dest. Check Display
Func.] [OFF]
[Confirm Addr (TX)] [OFF]