3 [paper, Paper] -23 – Konica Minolta bizhub 42 User Manual
Page 48
bizhub 42/36
4-23
4.9
[Print Settings]
4
4.9.3
[Paper]
Specify the paper to be used unless you specify an alternative.
%
Press the Utility/Counter key ö [Admin Settings] ö [Print Settings] ö [Paper].
Settings
[Default Paper]
[Paper Size]
Select the paper size.
[Custom Size]
Specify odd size paper.
[Width]: Specifies the paper width. (3.55 to 11.69
inches (90 to 297mm))
[Length]: Specifies the paper length. (5.50 to
14.00 inches (140 to 356 mm))
These settings can be specified if [Paper Size] is
set to [Custom Size].
[Paper Type]
Select the paper type.
[Measurement Unit Setting]
Select the measurement units.
Factory default
[Paper Size]
[Letter] ([A4])
[Custom Size]
This value varies depending on the area.
[Paper Type]
[Plain Paper]
[Measurement Unit Setting]
This value varies depending on the area.