Konica Minolta bizhub 42 - Manual (Page 81)

bizhub 42/36 4-56
4.18 [Fax Settings] 4
The following items are not available if Forward TX Setting is configured.
- PC-Fax RX Settings
- Memory RX
- Nighttime RX Settings
Reference
- If a document with a resolution of 300 e 300 dpi is received as an Internet Fax, it can not be forwarded
to a fax (G3) destination. In this case, this machine prints the document.
If [Confirm Addr (Register)] is [ON], a screen for entering the fax number again appears after you press [OK].
Enter the fax number and then press [OK].
d
Reference
For details on the Confirm Address function, refer to page 4-53.
Factory default
[Forward TX Setting] [OFF]
[Forward & Print] [Forward & Print (If TX Fails)]