Konica Minolta bizhub 42 - Manual (Page 85)

bizhub 42/36 4-60
4.18 [Fax Settings] 4
4.18.12 [PBX Connection Settings]
Specify the PBX line connection method.
%
Press the Utility/Counter key ö [Admin Settings] ö [Fax Settings] ö [PBX Connection Settings].
Settings
[PBX Function] Select whether or not a PBX line is connected.
[PBX Number] Specify an access code for an outside line. An access code refers to a
number used to connect to an outside line, such as a number beginning
with a zero ("0").
Outside line numbers specified here are dialed, after which fax numbers
registered with the address book or program are dialed.
Specify an access code (0 to 9999) using the keypad.
Factory default
[PBX Function] [OFF]