Konica Minolta bizhub 42 - Manual (Page 107)

bizhub 42/36 5-19
5.1 [System] tab 5
Item Description
[IP Address] [Notification Ad-
dress] Enter the destination IP address.
Format: *.*.*.* (Asterisk * can be 0 to 255)
If the DNS server has already been configured, you can enter
the host name instead. For the host name, specify a fully-qual-
ified domain name (FQDN).
When using IPv6, you can specify the IPv6 address.
[Port Number] Enter the port number of the SNMP trap.
Default setting: 123
[Community
Name] Enter a community name (up to 15 characters).
[IPX Address] [Notification Ad-
dress] Enter the IPX address using an 8-digit hexadecimal value.
[Node Address] Enter the node address using a 12-digit hexadecimal value.
[Community
Name] Enter a community name (up to 15 characters).
[E-mail Address] [Notification Ad-
dress] Enter the destination E-mail address (up to 320 characters).
[Alert] [Paper Empty] Sends a notification when the paper tray is empty.
[Paper Jam] Sends a notification when a page has been jammed.
[Maintenance] Sends a notification when the periodical inspection is required.
[Toner Out] Sends a notification when the toner is empty.
[Output Tray Full] Sends a notification when the capacity of the output tray has
been exceeded.
[Fuser Unit End] Sends a notification when the fusing unit needs to be replaced.
[Operator Call] Sends a notification when a error has occurred.
[Service Call] Sends a notification when a service call has occurred.
[Job Complete] Sends a notification when the job has finished.
[Job Error] Sends a notification when the job has ended abnormally.