Konica Minolta bizhub 42 - Manual (Page 51)

bizhub 42/36 4-26
4.9 [Print Settings] 4
4.9.6 [Emulation]
Configure default of printer languages and fonts.
%
Press the Utility/Counter key ö [Admin Settings] ö [Print Settings] ö [Emulation].
Settings
[Default Emulation] Select the machine emulation language.
If [Auto] is selected, the machine automatically selects the machine emu-
lation language from the data stream.
[PS] [Wait Timeout] Specify the time until an error is determined to be
a PostScript error.
If [0] is selected, no timeout is performed.
[Print PS Errors] Select whether or not an error page is printed
when a Postscript error occurs.
[PS Protocol] Select the protocol for data transmissions with a
PostScript data stream.
If [Auto] is selected, the machine automatically
selects an applicable protocol from the data
stream.
[PCL] [CR/LF Mapping] Select the definitions of the CR/LF codes in the
PCL language.
[Line/Page] Specify the number of lines per page in the PCL
language.
[Font Setting] • [Font Number]: Specify the default font in the
PCL language. The font numbers that appear
correspond to the PCL font list.
• [Pitch Size]: Specify the font size in the PCL
language. If the setting selected for [Font
Number] is for a bitmap font, [Pitch Size] ap-
pears. If the setting selected for [Font
Number] is for an outline font, [Point Size] ap-
pears.
• [Symbol Set]: Specify the symbol set used
with the PCL language.
[XPS] [Digital Signature] Select whether or not to enable XPS digital signa-
tures.
[Print XPS Errors] Select whether or not an error report is printed af-
ter an XPS error has occurred.
Factory default
[Default Emulation] [Auto]
[Wait Timeout] [0]
[Print PS Errors] [OFF]
[PS Protocol] [Auto]
[CR/LF Mapping] [CR=CR LF=LF]