Festo Контроллер двигателя CMMD-AS - Manual (Page 15)

2. Safety instructions for electric drives and controllers
Festo P.BE-CMMD-AS-HW-EN 1002NH 15
Warning
DANGER!
Dangerous movements!
Danger of death, serious bodily injury or damage to property due to
unintentional movement of the motors!
2.4 Safety instructions
2.4.1 General safety information
Warning
The motor controller corresponds to protection class IP20 as well
as degree of contamination 2.
The environment must conform to this protection class or the
degree of contamination (see chapter 5.1).
Warning
Use only accessories and spare parts which are approved of by
the manufacturer.
Warning
The motor controllers must be connected to the mains network
in accordance with EN standards and VDE or appropriate
national regulations, so that they can be disconnected with
suitable de-energising devices (e.g. power switch, fuse, circuit
breaker).
Warning
For switching the control contacts, gold contacts or contacts with
high contact pressure should be used.
Precautionary measures must be taken for preventing interference
to switching systems, e.g. wiring fuses and relays with RC elements
or diodes.
You must observe the safety regulations and directives of the
country in which the device is to be used.