If the documentation in the language in question cannot be understood fully, please
contact your vendor and inform them.
Proper and safe operation of the motor controller requires correct transport, storage,
mounting and installation as well as project planning that takes into account the risks,
protection and emergency measures, as well as careful operation and maintenance.

Note

Only trained and qualified personnel should be allowed to handle
the electric systems.

Trained and qualified personnel

For the purpose of this manual and the warning instructions on the product itself,
technicians working with this product must be adequately familiar with the erection,
mounting, setting-up and operation of the product as well as with all warnings and
precautionary measures in accordance with the operating instructions in this product
manual, and must be sufficiently qualified for this task:

- Training and instructions on or authorization to switch on and switch off

devices/systems in accordance with technical safety standards, and to earth
and mark them appropriately in accordance with the application requirements.

- Training or instructions in using and maintaining suitable safety equipment in

accordance with technical safety standards.

- Training in first aid.

The following instructions must be read before the system is commissioned for the first
time to prevent injury and/or material damage:

These safety instructions must be observed at all times.

Do not try to install or commission the motor controller before
you have carefully read through all safety instructions for
electric drives and controllers in this documentation.

You must read through these safety instructions and all other user
instructions before working with the motor controller.