Festo Контроллер двигателя CMMD-AS - Manual (Page 125)

A. Technical data
Festo P.BE-CMMD-AS-HW-EN 1002NH 125
A. Technical data
A.1 General
Range Values
Permitted temperature ranges Storage
temperature: –25 °C to +70 °C
Operating
temperature: 0 °C to +40 °C
+40 °C to +50 °C with power reduction 4
% / K
Permitted installation height Up to 1000 m over sea level
1000 to 3000 m over sea level with power reduction
10
% / 1000 m
Humidity Relative humidity up to 90 %, non-condensing
Protection class IP20 (mounted in a control cabinet)
Degree of contamination 2
CE-conformity with low-voltage guideline see declaration of conformity
CE-conformity with EMC guideline: see declaration of conformity
Further certifications UL/CSA in preparation
Table A.1 Technical data: Ambient conditions and qualifications
Key features Values
Device dimensions (HxWxD) 180 x 110 x 160 mm (excl. clip)
Weight approx. 2.5 kg
Table A.2 Technical data: Dimensions and weight
Area Values
Maximum motor cable length for interference emissions as per
EN 61800-3 (conforms to EN 55011, EN 55022)
Second environment (industrial)
l 15m
Cable capacitance of one phase against screen or between two lines C‘ 220pF/m
Table A.3 Technical data: Cable data
Sensors Values
Digital sensor N/C contact: R
cold
< 1 k R
hot
> 10 k
Table A.4 Technical data: Motor temperature monitoring