Anritsu ML2430A - Manual (Page 259)

C-3
CHANNEL MENU The Channel menu controls the operation of a display channel. There are two
display channels, Channel 1 and Channel 2. Channel 1 appears at the top of the
readout display and channel 2 at the bottom.
Channel
Setup
CHANNEL
1 | 2
[CHCFG] INPUT configuration
Off | A | B | A-B | B-A | A/B | B/A | EXT V
dual sensor configs NOT in ML2437A
ExtV only available if system setup mode=Readout
[CHUNIT] Measurement UNITS
dB(m) | W | dBuV | dBmV
V when input config = EXT V
[CHRES] Display decimal RESOLUTION
1 | 2 | 3
[MNMXS, GMNMX] Tracking MIN/MAX display
On | off
[MMRST] RESET tracked min/max } if MIN/MAX = ON
[REL] Rel 1 } if channel 1 = ON
[REL] Rel 2 } if channel 2 = ON
Limits
CHANNEL
1 | 2
[HLIM] HIGH Limit
-99.99dB to +99.99dB
7dBuV to 207dBuV
-53dBmV to 147dBmV
0 to 50W
0 to 20V
[LLIM] LOW Limit
-99.99dB to +99.99dB
7dBuV to 207dBuV
-53dBmV to 147dBmV
0 to 50W
0 to 20V
C-6 ML2430A OM
CHANNEL MENU APPENDIX C