Anritsu ML2430A - Manual (Page 255)

[CFSRC, CFVAL] SOURCE
Frequency | manual | vghz
SETUP } if source = VGHz only
[CVSTF] START Freq
10kHz to 122GHz
[CVSPF] STOP Freq
10kHz to 122GHz
[CVSTV] START Volts
-0.5V to 20.5V
[CVSPV] STOP Volts
-0.5V to 20.5V
[CFFRQ] Input signal FREQuency } if source = FREQ or MANUAL
10kHz to 122GHz
[CFUSL, CFUTBL,] USE TABLE } if source = VGHz or FREQ
[CFUUSE, CFUVLD]
Factory | 1 to max tables | factory + “1 to max tables”
max tables = 10 but determined by space in sensor EEPROM
[CFUNITS] %/dB
[CFUADD, CFULD,] EDIT table } if source = VGHz or FREQ
[CFURD]
TABLE
1 to max tables
EDIT values
down
up
CHANGE
FREQuency
10kHz to 122GHz
determined by fitted sensor
FACTOR
150% to 0.07%
–1.76dB to 31.55dB
DONE
INSERT
FREQuency
C-2 ML2430A OM
SENSOR MENU APPENDIX C