Anritsu ML2430A - Manual (Page 175)

MCR Clears the reference value at the specified memory loca-
tion.
Syntax: MCR
mem: Memory location 1 to 30.
Remarks: Clears the reference value at memory store to 0.0 dBm.
MCT Clears all the entries at the specified memory location.
Syntax: MCT
mem: Memory location 1 to 30.
Remarks: Clears frequency, cal factor, offset and reference values at memory store
.
MDI Disable memory store setting and use.
MEN Enable setting of the memory stores. Also will apply the last
memory store configured.
MFG Set the frequency value at the specified memory location in
GHz.
Syntax: MFG<;>
mem: Memory location 1 to 30.
value: Frequency value in GHz.
Remarks: Set the frequency value at memory store address to GHz.
MFM Set the frequency value at the specified memory location in
MHz.
Syntax: MFM<;>
mem: Memory location 1 to 30
value: Frequency value in MHz
Remarks: Set the frequency value at memory store address to MHz.
MOF
6-88 ML2430A OM
ML4803A EMULATION COMMANDS GPIB OPERATION