Anritsu ML2430A - Manual (Page 141)

MNGD ,,,ment_n>...<\n>
The first number in the string is the number of elements to follow, and is al-
ways 200 for the ML2430A Series.
MNMXS Track min and max values CHANNEL
Syntax: MNMXS ,
c: 1 or 2
state: ON or OFF
Remarks: Turns ON or OFF the min/max tracking for the specified channel. The
MMRST command resets the values.
Related
Commands: MMRST
Query: MNMXS?
Returned
String: MNMXS ,
MODDEL Modem redial delay time SYSTEM
Syntax: MODDEL
value: 1 to 10
Remarks: Sets the autodial delay between retrys. The value is the number of minutes
to delay between each autodial retry after a failure to connect. This interval
can be set from 1 to 10 minutes. See Section 5-10 for more information on
modem operation.
Query: MODDEL?
Returned
String: MODDEL
MODINIT Initialize modem SYSTEM
Syntax: MODINIT
Remarks: Initializes the modem connected to the ML2430A serial port. See Section
5-10 for more information on modem operation.
MODLIM Autodial enable for limits failure SYSTEM
6-54 ML2430A OM
ML24XXA NATIVE COMMANDS GPIB OPERATION