Anritsu ML2430A - Manual (Page 129)

GRDRQ ,,sor_2_dB>,,[,]
and are absolute values. is only
present when between cursor averaging is turned ON with the GRAVG
command.
If no data is available, that is, a sensor is not fitted, the profile is not trig-
gered, or the Power vs. Time graph has not reached to the cursor, the out-
put for the relevant readout value is 999 output as 9.99e2.
Example result strings might look like:
GRDRQ 1, –10.000, –5.000, 5, 1E-03 (cursor average off)
GRDRQ 1, –10.000, –5.000, 5, 1E-03, –7.5 (cursor average on)
Related
Commands: GRAVG, GRDATA
GRFS Profile Reference line state PROFILE SETUP
Syntax: GRFS
state: ON or OFF
Remarks: Turn the profile reference line ON or OFF. The profile reference line is cen-
tered between the top and bottom of the display.
Query: GRFS?
Returned
String: GRFS
GRMD Profile, Power vs. Time and Source Sweep Mode Channel
Selection PROFILE SETUP
Syntax: GRMD
c: 1 or 2
Remarks: Selects the channel displayed on the Profile, Power vs. Time and Source
Sweep graphs.
Query: GRMD?
Returned
String: GRMD
GRPIX Profile type PROFILE SETUP
6-42 ML2430A OM
ML24XXA NATIVE COMMANDS GPIB OPERATION