Anritsu ML2430A - Manual (Page 113)

This message can be manipulated to program a different table using the
CFULD command.
CFUSAV Cal factor table save SENSOR
Syntax: CFUSAV
Remarks: This command saves the cal factor table currently being edited to the ap-
propriate sensor. Processing may take a couple of seconds. Any command
that can select a new sensor and/or cal factor table for changing, will not
automatically save any previous changes made. It is the users responsibil-
ity to issue a CFUSAV command.
CFUSEL Select cal factor table SENSOR
Syntax: CFUSEL ,s:A or Btablenumber:table number or combination to use
0 = factory default table
1 to 10 = user table being used
11 to 20 = factory table + user table being usedRemarks:Selects the cal factor table or combination of tables to be used and auto-
matically updates the sensor.Example:CFUSEL A,13Selects the factory table plus user table 3 in sensor A.CFUTBLNumber of cal factor tables in the sensorSENSORSyntax:CFUTBL s:A or BRemarks:Returns the number of cal factor tables available in the selected sensor.CFUUSENumber of cal factor table being usedSENSORSyntax:CFUUSE s:A or B6-26ML2430A OMML24XXA NATIVE COMMANDSGPIB OPERATION Pages: 1 … 111 112 113 114 115 … 271 wrong Brand wrong Model non readable Sitemap
s: A or B
table
number: table number or combination to use
0 = factory default table
1 to 10 = user table being used
11 to 20 = factory table + user table being used
Remarks: Selects the cal factor table or combination of tables to be used and auto-
matically updates the sensor.
Example: CFUSEL A,13
Selects the factory table plus user table 3 in sensor A.
CFUTBL Number of cal factor tables in the sensor SENSOR
Syntax: CFUTBL
s: A or B
Remarks: Returns the number of cal factor tables available in the selected sensor.
CFUUSE Number of cal factor table being used SENSOR
Syntax: CFUUSE
s: A or B
6-26 ML2430A OM
ML24XXA NATIVE COMMANDS GPIB OPERATION