Anritsu ML2430A - Manual (Page 145)

port: 1 or 2
c: 1 or 2
Remarks: This command changes the channel represented by BNC output modes
that can take data from either channel 1 or 2, such as “Analog Output” and
“Pass/Fail” modes.
Query: OBCH?
Returned
String: OBCH ,
OBDSP BNC analog output display stop value BNC
Syntax: OBDSP ,,
port: 1 or 2
units: W (Watts)
DB (dB)
DBM (dB)
DBUV (dB
mV)
DBMV (dBmV)
val: 0 to 50W
–70 to 47dB
–23 to 94 dBmV
37 to 154 dB
mV
Remarks: Sets up the stop value for the analog out scale of the display.
Query: OBDSP?
Returned
String: OBDSP ,,
OBDST BNC analog out display start value BNC
Syntax: OBDST ,,
port: 1 or 2
units: W (Watts)
DB (dB)
DBM (dB)
DBUV (dB
mV)
DBMV (dBmV)
val: 0 to 50W
–70 to 47dB
–23 to 94 dBmV
37 to 154 dB
mV
Remarks: Sets up the start value for the analog out scale of the display.
6-58 ML2430A OM
ML24XXA NATIVE COMMANDS GPIB OPERATION