Allied Telesis AT-S24 - Manual (Page 94)

Configuring the MAC Address Table
94
The window in Figure 46 is displayed. You use this window to specify
the MAC address of the device you want to allow access to the port,
as well as the name of the VLAN to which the port belongs.
Figure 46 Adding a Static MAC Address Window
6. Select the VLAN Name field and enter the name of the VLAN to which
the port belongs. The default is Default VLAN. Select Enter or press
.
7. Select the MAC Address field and enter the static MAC address of the
device to have access to the port. Select Enter or press .
The address should be entered in the following format:
XXXXXX XXXXXX
After several seconds a confirmation screen is displayed, indicating
that the address has been added to the static MAC address table.
8. Return to the Main Menu.
9. If desired, perform the procedure Displaying the Static MAC
Address Table on page 92 to view the updated table.