Allied Telesis AT-S24 - Manual (Page 112)

Configuring Virtual LANs and Quality of Service
112
3. Select Add new table entry.
The VLAN Configuration window shown in Figure 55 is displayed. You
use this window to specify the parameters for the new VLAN, such as
its name and the ports on the switch that will be members of the
VLAN.
Figure 55 VLAN Configuration Window
4. In the VLAN Name field, enter a name for the new VLAN (for example,
Marketing). Select Enter or press .
After entering the name for the new VLAN and selecting Enter, the
VLAN ID number automatically increments to the next available
number. For example, if this is the first VLAN that you are adding to
the switch, the VID number increments to 2.
5. If you want, change the VLAN ID number by entering a number from
2–4096 in the ID field.
Note
Allied Telesyn highly recommends that you use the VLAN ID
(default) supplied by the system. Although you can change VLAN
IDs to suit your specific needs, changing them requires a more
advanced understanding of VLAN tagging.