Allied Telesis AT-S24 - Manual (Page 110)

Configuring Virtual LANs and Quality of Service
110
Creating a Port-based or Tagged VLAN
Only one VLAN is defined by default on an AT-8200XL Series Switch. This
VLAN is named Default VLAN. The Default VLAN is assigned a VLAN ID
and PVID of 1. All the ports on the switch are initially port-based
(untagged) members of the Default VLAN.
The procedure for creating a new VLAN consists of three phases:
❑ Phase 1:
— Name the VLAN.
— Assign a VLAN ID (VID) number to the VLAN.
— Designate which ports are to be members of the VLAN.
— Define which, if any, ports will be tagged ports.
❑ Phase 2:
— Remove the untagged ports from the existing VLAN.
❑ Phase 3:
— Change the PVID of the untagged ports in the new VLANs to
match the VID.
Phase 1
To perform Phase 1, do the following:
1. From the Omega Main Menu, select Virtual LANs/QoS. The Virtual
LAN/QoS menu in Figure 53 is displayed.
Figure 53 Virtual LAN/QoS Menu